|
Single Round Cloth Belt Loader |
|
As reviewed in the April 2006 edition of Small
Arms Review Magazine. Loads .308/7.62 NATO, .30-06 or 8mm cartridges in cloth belts for the 1917, 1919A4, M37 series
of guns, both full-auto and semi-auto. Designed to feed from the right or the left. Parkerized finish. 1/4"
diameter mount holes. Includes Manual, spacer bolts for all three calibers and belt awl.
|
|
|
This headspace gauge is used to adjust headspacing
to a starting point. From there, the headspace is adjusted to the ammunition. Machined from O1 steel, it is precision
ground to within .0002" of 1/8" (.125"). One end is chamfered to allow easy insertion into the bolt face area, the other
has a 1/8" hole for mounting a chain. Gauge ships in oil exuding plastic for rust prevention. Please keep this
gauge oiled to maintain its accuracy!
|
Uzi Permanant Stock Bushing |
The permanant stock bushing is used to convert
the Quick Disconnect stock mounting hardware so it may be permanantly mounted to a semi-auto carbine. Using the same bolt
as the permanant collapsable stock, the bushing replaces the original bushing and does not protrude from the back plate
allowing the mounting hardware to sit flush. CNC machined from 12L14 steel and finished in manganese phosphate "parkerizing."
NOTE: Original stock mounting hardware must have the button machined to flush and a hole drilled
in its place for the bolt. Also the stock must have a relief drilled for the bolt head.
|
Uzi Low-Profile Extended Charging Handle |
Replaces the cocking knob which interferes with
sight picture and also allows for use of optic sights. CNC machined from steel bar stock. Fits full-size and mini size Uzis.
Finished in dark gray manganese phophate "parkerizing." Includes instructions.
|
Galil Folding Stock Spacer |
Replaces stock spacer for the Galil folding stock.
Replaces loose, damaged or blemished spacers. Body is made from Delrin and the post from Nylon.
|
|
 |
Reproduction FM 23-45/TM 9-1005-212-25
|
|
Combination manual consists of: Field Manual 23-45 Chapter 1 “Browning Machine Gun, Caliber .30, HB, 1919A4 Ground”
with Technical Bulletin 23-45-1 “Browning Belt Filling Machine, Cal .30, Shuttle Type.” 49 Pages. This manual
covers function and operation, cleaning and user adjustments. Applicaple to the use and safe operation of the 1919 series
of guns. Technical Manual 9-1005-212-25 “Organizational, DS, GS and Depot Maintenance Manuals Including Repair
Parts and Special Tools List, Machine Gun, Caliber .30: Browning 1919A4 Flexible F/E, Machine Gun, Caliber .30: Browning M1919A6
W/E, Machine Gun, Caliber .30: M37, Mount, Tripod, Machine Gun: Caliber .30, M2, W/E.” 99 Pages. This manual includes
organizational, DS, GS and depot level repair and maintenance. Included are all diagrams, parts and repair tools tables.
This is an excellent resource to learn about detailed repair procedures on the 1919 series of guns. Heavy card-stock
covers for durability and wire-bound to lay flat.
|
|
|
This headspace wrench is used while adjusting headspace
to turn the barrel while installed in the gun. No need to remove the backplate and pull the internals to adjust headspace.
Hook is case hardened. Eliminates prying on the barrel or receiver and possibly scratching the finish. Instructions
for use can be seen HERE.
|
Uzi Permanant Fixed Stock
Hardware Machining
|
Service: Machining of customer supplied Uzi SMG
fixed stock hardware. This allows the SMG fixed stock to be used on a semi-auto carbine meeting the BATFE "permanantly attached"
standard requiring tools to remove the stock. Includes machining stock mounting hardware and stock bushing. Although
non-functioning, it retains the stock retention lever for that authentic look. All metal parts (including butt-cap and wood
screws if supplied) are finished in manganese phosphate "parkerizing". The customer must drill a relief in
the stock for the bolt head. Uses the same bolt as the permanant collapsable stock, $1 extra if needed.
|
|
|
Ambidextrous Extended
Charging Handle. Replaces the cocking knob which interferes with sight picture and also allows for use of optic
sights. CNC machined from steel bar stock. Fits full-size and mini size Uzis. Finished in dark gray manganese phophate "parkerizing."
Includes instructions..
|
P90/PS90 One-Piece Extended Accessory
Rail
|
One-Piece
Extended Accessory Rail for the P90/PS90 series rifles. CNC Machined from 6061 Aluminum with a flat black thermally cured
moly resin finish. This MIL-STD-1913 rail works on either the right or left side of the recever. Unlike other rails, this
is one piece and does not utilize spacers or stand-offs. Includes mounting screws.
|
|
